![]() ![]() Walls also make ideal reflectors outdoors, reflecting sunlight back upon a subject and reducing shadows (and hence overall contrast) according to the color, size and proximity of the wall. Hence bounce lighting may provide either the primary or secondary (fill) light source, depending on its intensity. As this very broad, flat lighting is more typical of an overcast day outdoors, a more realistic interior illumination is achieved by reducing the power of additional lighting relative to the available light, so that either source may act as a fill to the other. ![]() When "bounced" off a ceiling, the lighting resembles that of fluorescent tubes. The area to be photographed is lit by walls off-camera, which then provide illumination similar to that of a large window. Used extensively throughout film history, in 1956 Subrata Mitra further pioneered the technique with the use of large scale diffusers to match studio lighting with location shooting. Often known as "bounce flash" photography, but equally common with Tungsten lights in cinematography. Photographers make regular use of walls, ceilings and even entire rooms as reflectors, especially with the interior of buildings which may lack sufficient available light. Location photography calls for much more portable materials and a large range of lightweight, folding reflectors are commercially available in a variety of colors. Larger-scale subjects such as motor vehicles require the use of huge "flats", often requiring specialised motorized winches to position them accurately. In tabletop still life photography, small mirrors and card stock are used extensively, both to reduce lighting contrast and create highlights on reflective subjects such as glassware and jewelry. Reflectors vary enormously in size, colour, reflectivity and portability. Techniques with board reflectors Ī portable folding reflector positioned to "bounce" sunlight onto a model The lamp faces away from the scene to be photographed, allowing only reflected light to be thrown forward. A very common example of this technique is the traditional umbrella reflector, invented by George Larson, typically having a gold, silver or matte white interior onto which a lamp fitted with a circular reflector is projected, providing a broad, soft illumination. By positioning a board reflector close to a light source, its effective size can be increased by "bouncing" the light off it. Reflectors may also be used as a means of increasing the size of the main light source, which may (or may not) retain a direct path to the scene. In this case, light "spilling" from the main ambient or key light illuminating a scene is reflected back into the scene with a varying degrees of precision and intensity, according to the chosen reflective surface and its position relative to the scene. As a result, it is most commonly used to control contrast in both artificial and natural lighting, in place of a fill light or "kick" light. ![]() This kind of reflector generally has a very low reflectivity factor that varies widely according to surface texture and colour. Board reflectors Īlso known as plane reflectors, "flats" or bounce boards, this kind of reflector is located independent of a light source the light is reflected off its surface, either to achieve a broader light source, or control shadows and highlights, or both. A matte reflector will typically have a reflector factor of around 2, due to its more diffuse effect, while a polished or metallic-finished reflector may have a factor of up to 6. The reflector factor is the ratio of the illumination provided by a lamp fitted within a reflector to the illumination provided without any reflector fitted.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |